Commercial fence installation and repair in Austin, TX

What we handle

• New fence installation
• Fence repair: panels, posts and damaged sections
• New gates, double gates and gate conversions
• Gate latches, hinges and hardware
• Loose posts re-set and anchored to concrete
• Chain-link re-stretched and re-tied

Typical cost in Austin: new cedar or ornamental steel fencing usually runs about $25 to $35 per linear foot installed, and wood-framed welded wire panel about $45 to $55. Walk gates run about $150 to $300. Most repairs land around $200 to $700. Your firm price comes after we see it.

Repair it or replace it? We’ll price both.

The question we hear most is whether a fence can be fixed or needs to be replaced. When a problem has more than one fix, we price each one and tell you the benefits and risks of each, so you make the call. Sometimes that means talking ourselves out of the bigger job, because a cheaper fix now buys you time until the budget is there.

A school’s back fence. A school asked us to replace the entire fence along the back of its campus. The whole run did need replacing eventually, but one section had the urgent problem: the barbed wire was falling to the ground. So instead of only pricing the full replacement, we asked if they wanted that one section priced on its own too. That way, if the full fence wasn’t in this year’s budget, they could fix the hazard now and plan the rest later.

For the full run, we laid out the material choices, from the cheapest like-for-like option to ornamental iron matching the rest of the campus, with the tradeoffs of each. We also flagged what to check before anyone quotes it: whether the fence line is shared with the neighbors, whether a utility easement limits where posts can go, and the total length.

Two more recent jobs

Gate latches at a private school. The playground gate latches had failed. We ground off the old latches, smoothed and repainted the posts, installed new latches, and anchored a loose post back into the concrete.

A 3-foot gate turned into a 6-foot double gate. We set a new terminal post, added a panel, built the double gate and re-stretched the chain-link, so there were no gaps left for a dog to slip through.

Send us a photo of the fence or gate, and we’ll tell you whether it’s a repair or a replacement before you pay for anything.

Already working with us? Fence and gate repairs can go on your Monthly Handyman Plan visit instead of a separate call-out. See all our commercial handyman services.

Common questions

How much does a commercial fence cost in Austin?

New cedar or ornamental steel fencing usually runs about $25 to $35 per linear foot installed, and wood-framed welded wire panel about $45 to $55. Walk gates run about $150 to $300. Most repairs land around $200 to $700. Length, material, removing the old fence, gates and ground conditions all move the price. We confirm yours after we see it.

Should I repair my fence or replace it?

It depends on how much of the fence is still sound and what your budget looks like this year. When there’s more than one fix, we price each one, repair and replacement, and tell you the benefits and risks of each, so you can decide.

Do you install new fences?

Yes. We install new fencing and gates, and repair existing ones.

Can you fix just one section or one gate?

Yes. You don’t need to replace the whole fence to fix one section, one post or one gate.

Do you repair gate latches and hinges?

Yes. Latches, hinges and gate hardware, including gates that sag or won’t close on their own.